CKRC Forums

Save the date - February 3, 2024 from 9am to 12 PM

At the Gentlemen Pros Training Room - 5355 8 ST NE, Calgary AB.

Dan Pellizzari will be coming to Calgary for a LO206 Performance Clinic. Hosted by Team Trim

This is limited to 50 CKRC members who would like to learn more about tuning their (or their kids) LO206 engines, carbs and clutches.

Come join us for a face to face clinic with Dan and learn how to extract the most out of your LO206 engine.

Dan Pellizzari is famous for his Youtube 7 part series on tuning the LO206.
Part 1 – https://youtu.be/uupyX_b-68A?si=y8CWELBiaRvfxXV7
Part 2 – https://youtu.be/X8UU_5Ms-Yc?si=DHvFWfweggr_kPAB
Part 3 – https://youtu.be/kIl0izBrjLA?si=gWhvqRO1Irt4Zcfu
Part 4 – https://youtu.be/83c_b7R7khA?si=yWTudRwLcLc_Ss26
Part 5 – https://youtu.be/5_fQPRAaIeQ?si=epSs5rYWpJOWxHf0
Part 6 – https://youtu.be/iTHoWTOCXqk?si=88-g2Y6fILtxxOUu
Part 7 – https://youtu.be/Vp2ptsihiQ8?si=T2jFR_qq11h4guik


Topics covered in the clinic will likely include, Carb adjustments, Valve timing, lashing, Cylinder head work, setting up a clutch, and gearing.

If there is any topics that you would like covered or want more information on then please add some comments below so that Dan can come prepared.

Look for a sign up sheet on Motorsport Reg in the next few weeks.

If you have any other questions then please reach out to me via email.
[email protected]

The Motorsport Reg sign up is now available. Thanks to John Kwong

Available here - https://www.motorsportreg.com/events/lo ... ing-104399

I'd love to hear from Dan how Calgary's elevation and the gas we use affect his previous YouTube recommendations.

Looking forward to this!

Want to thank you guys in advance for being so generous to take the time to put on this event! There is always going to be new things to learn in setting up the kart. The engine is something I know little about other than general maintenance and upkeep.

Looking forward to the class. Don Gibson

Thanks Don!

For anyone running Briggs classes, I recommend watching and studying the youtube videos I posted above. They have so many good points to help you extract the most out of the engine.