Coming from Rotax, all my gears are solid, 219 so I'm starting from scratch on split gears.
Assuming a 16 tooth drive gear, if I were to buy, say, 3 split gears for the CKRC track, which 3 would I ask for ?
It is currently Thu Jun 20, 2013 2:10 am
CKRC.com
Home of the Calgary Kart Racing Club
Gearing
Forum rules
The forums are a place for open discussion of karting topics. Please respect the opinions of others. No name calling, abuse, bashing etc. of any sort will be tolerated and offending posts will be removed and offenders sanctioned at the discretion of the webmaster or the executive. All posted materials, text, etc. become the property of the CKRC and may be displayed or removed at the discretion of the CKRC.
4 posts
• Page 1 of 1
Re: Gearing
by John Kwong » Mon Jun 04, 2012 8:19 pm
I run a 16 tooth pinion and alternate between a 54 and 55 depending on how much the motor is getting into the rev limiter.
John K
John K
-
John Kwong - Posts: 626
- Joined: Wed Sep 24, 2008 8:00 am
- Location: Calgary
Re: Gearing
by CKRCAdmin » Mon Jun 04, 2012 9:41 pm
Thanks John; I'll use that as a starting point.
Mark Hillier -CKRC.com Admin
Posts made by me are my opinion and do not necessarily reflect those of the CKRC unless specifically stated.
Posts made by me are my opinion and do not necessarily reflect those of the CKRC unless specifically stated.
- CKRCAdmin
- Site Admin
- Posts: 278
- Joined: Wed Jul 09, 2008 1:57 pm
Re: Gearing
by John Kwong » Tue Jun 12, 2012 9:34 am
FYI - This past weekend with the water running across, I ran 16/58 on Sunday's race.
John K
John K
-
John Kwong - Posts: 626
- Joined: Wed Sep 24, 2008 8:00 am
- Location: Calgary
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 0 guests